James Hardie Siding Installation in Antelope, CA

If you own one of Antelope’s aging single-family tract homes, you want a home’s exterior that protects your home for decades. We install certified James Hardie fiber cement siding, backed by family-owned oversight and a 15-year workmanship warranty. For Antelope homeowners searching for siding contractors near me, the short answer is this: hire a James Hardie Alliance Select Contractor who is licensed, bonded, and insured under California General Building License #1092104, offers a free estimate, and works from a nearby Roseville office.
Modern Construction Group is a family-owned premium exterior remodeler, and Antelope sits squarely within the service area we cover from Roseville, about five miles northeast of the community. Roughly 85.3% of Antelope housing units are single-family homes, which is exactly the owner-occupied, long-term exterior work we specialize in. We do not chase a long service menu. We master James Hardie siding and Anlin windows and doors, and we do them right the first time. For a home improvement decision this significant, that focus is what you want behind your project.
In California, any contractor you hire for this work must hold an active license from the Contractors State License Board (CSLB). Ours is #1092104, and you can verify it before we ever set foot on your property.
Get your free estimate today. Call (916) 699-7070.
Our Siding Services in Antelope
We specialize in James Hardie fiber cement siding installation and replacement, not a long service menu. That focus is deliberate. Rather than spreading across dozens of trades, we chose to master the two most impactful exterior improvements for Northern California homes: premium fiber cement siding and Anlin windows and doors. We call it Quality Over Quantity, and it is the reason our crews know exactly how James Hardie should be flashed, fastened, and finished on a home like yours. Our siding services are built around one material family and one standard of workmanship, and homeowners consistently tell us our crews did an excellent job on the details that matter.
That specialization matters in Antelope, where roughly 85.3% of housing units are single-family homes built to be lived in for the long haul. Fiber cement suits this valley climate. It resists the warping and fading that prolonged summer heat causes in lesser materials, and when it is installed with the correct weather-resistive barrier and flashing, it manages the seasonal rain that arrives from late fall through early spring. Proper installation is what keeps water out of the wall assembly and preserves the structure behind the exterior siding. Every installation we complete carries the manufacturer warranties that come with the product, so your coverage is real and documented. When you choose the right siding for a Northern California home, you are choosing lasting value and decades of performance, not a short-term cosmetic fix.
James Hardie Fiber Cement Siding Installation & Replacement
James Hardie fiber cement siding is the gold standard for durability, beauty, and fire resistance, and it is the only siding we install. It is engineered to withstand high summer temperatures without warping or fading, which is a genuine concern during Antelope’s triple-digit stretches. ColorPlus® Technology gives it a baked-on, fade-resistant finish, so your new siding holds its color through years of direct valley sun without the peeling paint and repainting cycle other materials demand. A 30-year material warranty is available on the product itself. The fire-resistant quality of fiber cement is a material attribute that matters across Northern California. Whether you are installing new Hardie board siding or replacing failing cladding, our expert siding installation is handled by certified Alliance Select installers, and the way a crisply trimmed James Hardie exterior lifts your home’s curb appeal is immediate.
Professional Siding Replacement for Aging Tract Homes
Siding replacement on a 1980s or 1990s Antelope home means a full tear-off, not an overlay. We remove the existing siding, inspect the sheathing underneath, repair what needs repairing, install a code-compliant weather-resistive barrier and flashing, then set the James Hardie siding, trim, and finish. Older homes frequently hide moisture damage or structural damage beneath original cladding, and you cannot see or address that without pulling the old material off. Overlaying new siding over damaged siding traps moisture problems in place, which is why we never do it. Our installation services include inspection, repair, and weatherproofing so the wall assembly is sound before the new exterior goes on. A proper siding replacement does more than refresh the look of your home’s exterior. It restores the building’s first line of defense against heat and water.
Dry Rot & Siding Repair During Re-Siding
When the old siding comes off, we inspect the exposed sheathing and document any damage before we go further. Homes from Antelope’s main 1980s and 1990s building wave often carry hidden fungal decay or compromised framing behind the original cladding, especially around windows, penetrations, and at grade. Dry rot and siding repair are among the most common hidden needs we uncover during a siding project, and catching it now prevents far costlier structural work later. If we find it, you receive a written change order that spells out the scope, the cost, and the schedule impact. Nothing gets repaired as a surprise line item. You approve it first, then we proceed, which is the kind of detail oriented process that earns trust.
Anlin Window & Door Replacement (Companion Service)
We are an Anlin Authorized Dealer, and window and door replacement is our companion specialty to siding. Anlin windows are California-engineered with Low-E3 glass for energy savings, and they carry a lifetime warranty with accidental breakage coverage. Many Antelope homeowners pair new windows with a re-siding project, because opening the home’s exterior is the ideal moment to upgrade flashing and glazing together. The result is a tighter, more energy-efficient, quieter home, and the combined energy efficiency gains from new siding and new windows together are greater than either upgrade alone, which also helps bring down cooling costs through long valley summers.
Choosing the Right Siding: Fiber Cement, LP SmartSide, Vinyl & Classic Wood Siding
You will see several siding material options marketed for this climate, and it helps to understand the tradeoffs honestly. Classic wood siding offers timeless looks but demands constant maintenance, and in a hot, dry valley it is vulnerable to cracking, cupping, and the same fungal decay we so often find behind failing cladding. Engineered wood, including products like LP SmartSide, is treated against moisture and pests and performs better than natural wood siding when maintained, holding a nail well and taking paint cleanly. Insulated vinyl siding is the least expensive siding option and installs quickly, which is why it shows up on budget-driven jobs, though it can warp in sustained heat and offers no fire resistance. Some homeowners also ask about brick veneer, which is durable but a very different product and budget than lap siding. Fiber cement sits at the premium end. Industry figures put siding replacement at roughly $4 to $16 per square foot in 2026, with vinyl siding averaging about $4 to $8 per square foot at the lower end of that spread.
Here is how the common siding materials compare on the factors that matter most for a Northern California home you plan to keep for decades.
| Siding Material | Typical Installed Cost (2026) | Heat Stability | Fire Resistance | Ongoing Maintenance |
|---|---|---|---|---|
| Vinyl siding | About $4 to $8 per sq ft | Can warp in sustained heat | None | Low, but no refinishing option |
| Natural wood siding | Within the $4 to $16 per sq ft range | Prone to cracking and cupping | Limited | High, constant upkeep and repainting |
| Engineered wood | Within the $4 to $16 per sq ft range | Good when finish is intact | Limited | Recurring exterior painting |
| James Hardie fiber cement | Toward the upper end of $4 to $16 per sq ft | Dimensionally stable in triple-digit heat | Fire-resistant material | Low, factory ColorPlus® finish reduces repainting |
We install James Hardie because, for a home you plan to keep for decades, it is the right siding for the long term: fire-resistant, dimensionally stable in heat, and backed by a 30-year material warranty. We do not publish a price here, and we do not criticize other products. We simply tell you why we built our business around this one. Exterior painting on wood or engineered wood becomes a recurring expense and ongoing maintenance item over the years, while James Hardie’s factory ColorPlus® finish is designed to hold up far longer between touch-ups.
Learn more about siding, or call (916) 699-7070 for your free estimate.
Why Antelope Homeowners Choose Us

Antelope homeowners choose us for certifications most siding contractors cannot claim, family-owned accountability, and local Sacramento County knowledge. We are a James Hardie Alliance Select Contractor and an Anlin Authorized Dealer, licensed, bonded, and insured under #1092104, with 25+ years of experience and a 15-year workmanship warranty behind every job. When you are making a 10 to 30 year decision about your home’s exterior, those are the things that separate a safe choice from a gamble. As a family owned business, our name is on the line with every project.
Before you sign with anyone, verify the contractor’s credentials with an active CSLB license check. Choosing a licensed contractor is what secures your workmanship warranty, and California requires contractors to carry workers’ compensation and general liability insurance, which protects you if a worker is injured on your property. We meet all of it, and we encourage you to confirm it yourself. Our standing reflects it too: we are a full service exterior remodeler, BBB accredited with an A+ rating, a record you can verify independently alongside our license.
James Hardie Alliance Select Contractor
The Alliance Select Contractor designation is awarded to a select few installers who meet James Hardie’s highest standards for installation expertise, customer service, and business practices. It is not a sticker you buy. It is a credential you earn and keep by performing to standard. Among siding contractors in the greater Sacramento region, relatively few carry this designation, which is part of why it carries weight. You can confirm our contractor status independently with a CSLB license check against #1092104, so the certification is not just marketing language on a page.
Licensed, Bonded & Insured — #1092104
We hold California General Building License #1092104, and we are licensed, bonded, and insured. California contractors must hold an active license from the Contractors State License Board, and the law requires workers’ compensation insurance for contractors with employees. That insurance protects you, the homeowner, from liability if something goes wrong during the work. Look up the number, check that it is active, and confirm the coverage before any contractor starts on your home. Paired with our A+ BBB rating, that is a documented track record you can check in minutes.
Our BBB Rating & 15-Year Workmanship Warranty + Manufacturer Coverage
You receive a 15-year workmanship warranty on our installation, a 30-year James Hardie material warranty available on the siding itself, and a lifetime Anlin warranty with accidental breakage coverage on windows and doors. That is specific, written protection, not a vague satisfaction promise. When a bid comes in lower, ask what it covers after the crew leaves. The real cost of exterior work is doing it twice. Doing it right once, with quality workmanship and warranties that stand behind both the siding material and the labor, is why premium siding installation holds its value over the life of the home. Our A+ BBB rating reflects the same standard.
Family-Owned Accountability You Can Reach
Family ownership means someone with a personal stake oversees every Antelope project. Owner and founder Gary Chernyetsky is documented in reviews on our site supervising work directly, communicating with homeowners, and holding crews to his standard. One review describes Gary resolving a defective Dutch door with the manufacturer. Others describe him requiring items that were not executed perfectly to be redone, with homeowners noting his team did an amazing job once every detail met his bar. That is what accountability and customer satisfaction look like when the name on the business is the name on the job, and it is the difference between a company that stands behind its quality work and one that moves on to the next address.
Call (916) 699-7070 to talk with us about your home.
How Your Antelope Siding Project Works
Your Antelope siding installation follows a simple, transparent process from the first call to final inspection. You know the scope, the schedule, and the cost before work begins, and you are never surprised by a line item. Here is how each stage runs.
1 — Free Estimate & Measured Scope
We measure your actual exterior wall area on site and give you an itemized written estimate at a fair price, not a guess based on interior floor area. The estimate separates labor and materials so you can compare bids on identical scope and judge our competitive pricing against anyone else’s. It details tear-off, disposal, the weather-resistive barrier, flashing, trim, siding profile, finish, permit fees, and how we handle concealed damage. California home improvement contracts cannot require a down payment exceeding $1,000 or 10% of the total contract price, whichever is less, and ours never will. If financing is on your mind, this is the stage to ask about it, and we can point you to the options available.
2 — Permit & Scheduling Through Sacramento County
We pull the Sacramento County permit for your siding work. Because Antelope is unincorporated, residential permits go through Sacramento County Building Permits & Inspection, and we submit through the County’s online Accela portal. The County’s published general timeline is about one to three days for intake plus roughly 14 to 21 working days for plan review, depending on valuation. Licensed contractors comply with local building codes, and we fold permit lead time into the schedule we give you so nothing is a surprise.
3 — Tear-Off, Inspection & Weatherproofing
We remove the old siding, inspect and repair the sheathing, then install the weather-resistive barrier and flashing before any James Hardie goes up. This is also when dry rot repair happens if the tear-off reveals it. Proper installation is essential for moisture management and the structural integrity of your siding, which is why this stage matters more than the finished surface. A dedicated project manager keeps the entire project on track. We install to James Hardie’s HZ10 requirements, including specified clearances from roofs, grade, hardscape, and horizontal flashing, so the system performs through Antelope’s wet winters.
4 — Installation, Finish & Final Walkthrough
Active siding installation typically takes one to two weeks, and a single-story home often takes a few days to a week. We set the James Hardie siding and trim, complete the ColorPlus® finish details, and coordinate the required County inspections through to final approval. We close out with a final walkthrough so you can see the work up close and feel proud of your home’s new exterior. The transformation in curb appeal is usually obvious by the time the trim goes on. Hidden repairs or inspection scheduling can shift the window, and we tell you if that happens rather than letting the date slide quietly.
Siding in Antelope: Local Homes, Climate & Permits

We know Antelope’s housing stock, the Sacramento County permit process, and the valley climate your siding has to survive. Antelope is an unincorporated census-designated place served by Sacramento County, not an Antelope city government, so the people who actually show up for your project need to know how the County handles permits and inspections. We do, and we work this area regularly from our nearby Roseville office.
Antelope’s 1980s–90s Tract Homes
Antelope’s housing is concentrated in detached homes built during the 1980s and 1990s, with a median construction year of 1993. Roughly 4,298 homes were built in the 1980s and 5,983 in the 1990s, which together make up about two-thirds of the current stock. Approximately 85.3% of units are single-family, and about 70.2% of occupied homes are owner-occupied. That describes a community of long-term owners living in roughly 27 to 46 year old tract homes, plus a share of rental properties whose owners want durable, low-upkeep exteriors. Many of these homes still wear their original cladding, often wood siding or early composite products that have weathered three decades of valley sun and rain. Original cladding, trim, caulking, and flashing on a home that age deserve a look before another wet season arrives, because that is when water finds any gap that has opened up over the decades. Your home deserves an exterior built to match how long you plan to keep it.
Neighborhoods We Serve — North Country to Barrett Ranch
We orient by Antelope’s real subdivisions and landmarks because measured scope depends on the actual home and its home’s style.
- North Country: A named subdivision off North Country Drive, with property records showing detached two-story homes built in the 1980s. These aging exteriors are prime candidates for inspection and siding replacement.
- Antelope Trails: Near Poker Lane and Don Julio Boulevard, with records showing larger two-story homes, one a 2,685-square-foot home on a 6,356-square-foot lot. Two-story access and gable trim quantities make a measured scope essential rather than a price based on floor area.
- Barrett Ranch East: Planned along Don Julio Boulevard north of Antelope Road, with single-family lots ranging from 40×90 to 55×110 feet. Antelope’s newer-growth area, where the focus is coordinated design and protecting newer wall assemblies.
- Palmerson Drive corridor: Antelope Community Park at 8012 Palmerson Drive anchors this part of the community with its aquatic complex, sports fields, and trails.
- North Loop / Tetotom Park: Tetotom Park at 5127 Heartland Drive near North Loop and Don Julio Boulevard is a central orientation point.
- Gibson Ranch side: Sacramento County identifies Gibson Ranch at the western edge of Antelope.
We serve homes near Antelope Station Park, Lone Oak Park, Barrett Ranch Park, and the other named parks across the community. Wherever you are in our service area, we measure the home itself.
Permits & Code — Sacramento County, Not an Antelope City Hall
Siding permits in Antelope are issued by Sacramento County, not a local Antelope city hall. Sacramento County lists siding and stucco among projects that typically require a permit, and applications go through the County’s online Accela portal. Local building regulations may dictate aesthetic standards and permit requirements, and licensed contractors comply with those codes. In California, siding work exceeding $500 in combined labor and materials must be performed by a licensed contractor, which is another reason to verify your installer. The County has adopted the 2025 California Residential Code with County amendments, and the published plan-review timeline runs about one to three days for intake plus roughly 14 to 21 working days for review. Antelope’s Community Plan is map-based with no adopted narrative text, and that map identifies Neighborhood Preservation Areas and the East Antelope Specific Plan. Those overlays can carry standards that differ from normal zoning, so we check your specific parcel rather than assume one rule covers all of Antelope. We pull the permit, pay the fee, and schedule the inspections.
Valley Heat, Seasonal Rain & Fire-Resistant Siding
Antelope has hot, dry summers and mild, damp winters, which drives how we detail and schedule your siding. Summers bring prolonged stretches of triple-digit temperatures, so staging, sealant handling, and daily site protection all account for the heat. This is also the climate where older wood siding and underperforming vinyl siding show their limits, warping and fading in ways fiber cement simply does not, which affects both appearance and the long term durability of the wall. Most rain falls from late fall through early spring, which is exactly why the weather-resistive barrier, window and door flashing, and HZ10 clearances matter more than the visible siding surface. Get the flashing right and water never reaches the wall. James Hardie’s fire resistance is a genuine material benefit across Northern California, but we do not claim all of Antelope sits in a WUI zone. Fire hazard designations are parcel-specific, so check your address in the current CAL FIRE viewer rather than assuming. This is a valley market shaped by heat and rain, not mountain snow.
A Short Drive From Our Roseville Office & Our Full Service Area
Our Roseville office is a short drive from Antelope, which is about five miles southwest of Roseville. Walerga Road connects the two communities, and our office at 300 Harding Blvd., Suite 117, Roseville, CA 95678 puts our crews close enough to respond without the delays of a distant contractor. Beyond Antelope, we serve North Highlands, Elk Grove, Fair Oaks, and Sacramento homes across the region. We will not promise an exact drive time to your door, but being nearby means site visits, estimates, and follow-up are straightforward. It also means we know this market, not as a line on a map, but as a place our crews drive through and work in week after week.
Call (916) 699-7070 or reach us through our contact page to schedule your free estimate.
Frequently Asked Questions
What is the average cost of a siding job in Antelope?
There is no fixed number, because price depends on your measured wall area, tear-off, trim, access, and any concealed damage we find once the old siding is off. Industry figures put siding replacement at roughly $4 to $16 per square foot in 2026, but that range spans different materials and scopes. The siding material you choose matters too, since vinyl siding, engineered wood, and fiber cement each carry a different installed cost. We give you a transparent written estimate that details labor and materials separately before any work begins, so you see exactly what drives your figure. Call (916) 699-7070 for a free estimate on your specific home.
How much does siding cost for a 3,000 sq ft house?
Siding is measured by exterior wall area, not interior floor area, so a 3,000-square-foot home does not translate directly into a siding quantity. A two-story home with multiple gables, repeated window openings, and tight side-yard access carries different wall area and staging needs than a single-story home of the same floor size. With 2026 siding replacement running roughly $4 to $16 per square foot across materials, the honest answer comes from measuring your home. We do that at no charge during a free estimate.
How much is 2,000 square feet of siding? Or 1,000 square feet?
The per-square-foot figure depends on scope, not just quantity. Tear-off, the weather-resistive barrier, flashing, trim, and the siding material you choose all move the number. Vinyl siding is the least expensive option, averaging about $4 to $8 per square foot, while siding replacement overall runs roughly $4 to $16 per square foot in 2026. We install premium James Hardie fiber cement, which sits toward the upper end for good reason: durability, fire resistance, and a 30-year material warranty available. The accurate figure for 1,000 or 2,000 square feet comes from a measured free estimate.
Is fiber cement better than vinyl or engineered wood siding?
For a home you intend to keep for decades in this valley climate, we believe fiber cement is the right siding. Vinyl siding is the least expensive to install but can warp under sustained heat and offers no fire resistance. Engineered wood such as LP SmartSide performs better than natural wood siding and holds paint well, but it still relies on an intact finish to keep moisture out and carries an ongoing exterior painting commitment. James Hardie fiber cement is fire-resistant, dimensionally stable in triple-digit heat, and backed by a 30-year material warranty, with a factory ColorPlus® finish that reduces repainting and helps improve curb appeal for the long haul. We do not disparage other products. We simply built our business around the one we trust most for Northern California homes.
Do I need a permit to replace siding in Antelope, and who pulls it?
Yes, and we pull it. Sacramento County lists siding and stucco among projects that typically require a permit, and because Antelope is unincorporated, Sacramento County Building Permits & Inspection is the authority. As a licensed contractor who complies with local building codes, we submit the application, pay the fee, and schedule the inspections through to final approval. You do not have to navigate the County portal yourself.
How long does siding installation take in Antelope?
Active siding installation commonly takes one to two weeks, and a single-story home often takes a few days to a week. That is separate from permit and material lead time, which we build into the schedule up front. Hidden repairs found during tear-off and the timing of County inspections can shift the window, so we give you a home-specific schedule after measuring rather than a fixed promise. Siding replacement overall can run from several days to a couple of weeks depending on the home.
What if you find dry rot after the old siding comes off?
We inspect the exposed sheathing and document any repair in a written change order before we proceed. Older Antelope homes frequently hide dry rot or structural damage beneath original siding, so our process includes inspection, dry rot repair, and weatherproofing as standard. If we find damage, the change order spells out the scope, the cost, and the schedule impact, and you approve it before any additional work happens. No surprise charges.
Get Your Free Estimate for Antelope Siding
If your Antelope home’s exterior is showing its age, now is the sensible time to act, before another wet season reaches the wall assembly. We make it straightforward: a free estimate, a measured scope, and certified James Hardie siding installation backed by a 15-year workmanship warranty. New siding is one of the highest-impact home improvement projects you can make, improving both curb appeal and the protection of the structure behind it. Antelope is within our service area, financing is available if you want to ask about options, and we are licensed, bonded, and insured under #1092104 with an A+ BBB rating.
Call (916) 699-7070 or reach us through our contact page. Our office is at 300 Harding Blvd., Suite 117 in Roseville, a short drive from Antelope. Let us protect and enhance your most important investment, done right the first time.